Venus landing

Preparing your space journey…

Preparing your 3D resort

Hong Kong Disneyland 3D is a free, unofficial browser experience with themed lands, resort hotels and virtual fireworks.

香港迪士尼樂園 3D 虛擬探索:免費遊覽主題園區、度假酒店及欣賞虛擬煙花,屬非官方同人作品。

Venus landing · 金星探索

Guide by · 指南作者 · Content updated · 內容更新

Original model rendering of Venus landing in this project; an unofficial artistic interpretation
Original model rendering · 本站模型離線渲染,光線屬示意,並非實景照片。 Image credits

Venus landing

Land on an illustrative volcanic Venus beneath a dense amber sky. Deploy the rover, track your position, and meet imagined heat-adapted insects and underground Venusians. Venus is extremely hot; its creatures and protective equipment here are fictional, not scientific discoveries. Return to Hong Kong whenever you choose.

What can I do here?

Explore volcanic-looking rocks beneath an amber sky. Drive the rover, watch imagined heat-adapted insects, and look for underground visitors near the authored caves and access points.

Can I land, walk and deploy a rover?

Yes. This journey opens at an illustrative landing area. Choose a tool from Exploration devices, then explore and track your position on the local map.

Which exploration missions can I try?

Available tools depend on the world. Each expedition has two checkpoints: follow the gold beacon, map diamond and panel direction/distance to the next target. These devices are available here:

  • Six-wheel rover — Six-wheel suspension · scan two outcrops
  • Jetpack — High vantage survey with the crew · R/F climb and land
  • Hopping probe — Record two gravity hop landings · hold Space
  • Robot dog — Inspect two crew-route checkpoints · remote or follow
  • Two-seat Moon buggy — Crew transport and return · seated or chase camera
  • Exploration shuttle — Survey and land at a distant site · R/F altitude

At the target, release movement, altitude and steering controls and let the device settle before scanning, inspecting or confirming arrival. Recording takes three seconds. Leaving range, climbing, descending, turning, parking or collecting cancels an unfinished recording; Pause freezes progress. Aerial surveys also require the height shown on the panel.

Landing tasks require flight followed by actual ground contact in the target area; hovering just above the ground does not count as landing. The hopping probe uses each world’s gravity, and only landings in the marked zone earn credit. Distances, heights and survey records are simulated, not scientific measurements.

Open the Simulated expedition log to review checkpoints, or use Exploration journal to reopen a visited destination. Completed checkpoints are saved in this browser for later visits, including after visiting another world or reloading; positions and unfinished scans are not saved. If the browser cannot save records, they last only until the page closes. Clearing site data or closing a private session may remove them. Collect the current device before changing tools. Returning to Earth also waits for device collection.

How do I control the journey and return?

Use the bottom controls to switch views, pause or reset the view. Drive the rover with WASD or arrow keys and hold the left mouse button to look around; touch controls are available on phones.

The journey stays at the destination until you choose Return to Earth. During surface exploration, use the collect/return controls to bring the rover back before departure.

How do I use the telescope and take photos?

Switch to the rocket cabin and open the telescope. Hold the left mouse button to drag or use WASD to aim. Q zooms out, E zooms in; the wheel and on-screen buttons also work. Press Space or the photo button to capture the current view, then download a PNG or use sharing supported by your device. Esc closes the telescope.

Choose an available celestial body from Track target to keep it centred as it moves, then adjust magnification from 1–100×. A View obstructed message means another body blocks the sightline; tracking does not see through it.

Drag, use WASD or the direction controls, or choose Manual aim to release tracking while keeping the current direction and magnification. Reset telescope restores the initial direction and 1×. Photos work in both tracking and manual modes.

Astronomy background

Venus is a rocky planet with a dense carbon-dioxide atmosphere and an extreme greenhouse effect. It is the hottest planet in our solar system.

What is fictional?

The insects, underground Venusians, caves, walkable setting and protective equipment are invented. This project does not report evidence of life on Venus.

Are the positions live?

The solar-system overview and navigation map use Astronomy Engine to calculate positions for the date and time captured when the world opens. This fixed snapshot is not continuously refreshed. Display distances are compressed; local terrain, spacecraft routes, cloud patterns and most moon animations are illustrative. Dashboard speed and Earth distance describe the simulated journey, not a real spacecraft.

References

金星探索

降落喺濃厚琥珀色天空下嘅幻想金星,探索火山岩地形、漫步同駕駛探測車,配合地圖追蹤位置。地面有原創耐熱昆蟲,地下住有會出現嘅金星人。金星極高溫;生物同保護裝備均屬幻想設定,並非科學發現。可隨時選擇返航香港。

可以玩啲咩?

喺琥珀色天空下探索火山岩場景,駕駛探測車、觀察幻想耐熱昆蟲,並喺原創山洞同出入口附近尋找地下訪客。

可以登陸、漫步同放車仔嗎?

可以。本旅程直接喺示意著陸區開始;喺「探索裝置」選擇工具,配合當地地圖探索同追蹤位置。

探索裝置有咩任務?

可用裝置會按所在星球改變。每款有兩個檢查點,跟住金色標記、地圖菱形同面板嘅方向/距離指引前往目標。以下係呢個目的地可以選擇嘅工具:

  • 六輪探測車 — 六輪懸掛 · 岩石掃描任務
  • 噴射背包 — 角色結伴高處觀測 · R/F 升降及著陸
  • 跳躍探測器 — 記錄兩次重力跳躍 · 按住空白鍵連跳
  • 四足機械狗 — 兩處路線巡查 · 遙控或跟隨角色
  • 雙人月球車 — 角色來回接送 · 車內/跟車鏡頭
  • 小型穿梭艇 — 遠處地點勘察及著陸 · R/F 升降

到達目標後先放開移動、升降同轉向制,停穩再開始掃描、巡查或確認抵達。記錄需要 3 秒;移出範圍、升降、轉向、停泊或收回裝置會取消未完成記錄,暫停則會停住進度。飛行勘察要保持面板指定高度。

著陸任務要先真正飛起,再喺目標區接觸地面;貼近地面懸浮唔算著陸。跳躍探測器按所在星球重力起跳,喺標記區著地先會計入任務。距離、高度同考察紀錄均屬模擬,並非實測科學數據。

喺「模擬考察紀錄」查看已完成檢查點;「探索紀錄」可重開到訪過嘅目的地。完成進度會自動保存在此瀏覽器,重新到訪、轉換星球後返回或重新載入仍可接續;只保存已完成檢查點,唔保存途中位置或未完成掃描。若瀏覽器無法儲存,紀錄只會保留到關閉頁面;清除網站資料或關閉無痕視窗亦可能遺失紀錄。要更換工具,先收回目前裝置;返回地球亦會先等裝置收回。

點樣操作同返地球?

用下面控制條切換視角、暫停或重設視角。駕駛探測車時使用 WASD/方向鍵,按住左鍵拖曳環視;手機可用畫面控制。

旅程會停留喺目的地,直到你選擇「返回地球」。地面探索時先用收車/返回控制收回探測車,再開始返航。

望遠鏡點用?可以影相嗎?

切換到火箭艙內再打開望遠鏡。按住左鍵拖曳或用 WASD 瞄準;Q 縮小、E 放大,亦可用滾輪或畫面按鈕。按 Space 或影相制擷取目前視角,預覽後可下載 PNG 或使用裝置支援嘅分享功能;Esc 關閉望遠鏡。

用「追蹤目標」選單揀目前場景可用嘅行星或衛星,望遠鏡會跟住目標並保持佢喺中央,再喺 1–100× 範圍調整倍率。如果顯示「視線受遮擋」,代表有天體擋住視線,追蹤唔會穿透遮擋。

拖曳、按 WASD/方向控制,或者選「手動瞄準」會解除追蹤,保留目前方向同倍率;「重設望遠鏡」會返回初始方向及 1×。可喺追蹤或手動模式影相。

科學背景

金星係有濃厚二氧化碳大氣層嘅岩石行星,強烈溫室效應令佢成為太陽系最熱嘅行星。

邊啲係幻想設定?

昆蟲、地底金星人、山洞、可漫步環境同保護裝備都係虛構;本作品並冇報告金星存在生命嘅證據。

位置係實時嗎?

太陽系俯瞰同導航小地圖使用 Astronomy Engine,按開啟世界時記錄嘅日期與時間計算天體位置;此固定快照唔會持續更新。顯示距離經壓縮,當地地形、飛船航線、雲紋同大部分衛星動畫均屬示意。儀表航速同地球距離描述模擬旅程,並非真實航天器。

參考資料